Reference Guide

show ap debug mgmt-frames
show ap debug mgmt-frames <mac>
Description
This command displays the trace information for the 802.11 management frames.
Syntax
Parameter Description
<mac>
Displays trace information for a W-IAP based on MAC address.
Example
The following example shows the partial output of show ap debug mgmt-frames command:
Traced 802.11 Management Frames
-------------------------------
Timestamp stype SA DA BSS signal Misc
--------- ----- ------- ------ ----
May 9 23:09:42 deauth d8:c7:c8:c4:29:82 08:ed:b9:e1:51:87 d8:c7:c8:c4:29:82 15 -
May 9 23:09:42 disassoc d8:c7:c8:c4:29:82 08:ed:b9:e1:51:87 d8:c7:c8:c4:29:82 15 -
May 9 23:09:03assoc-respd8:c7:c8:c4:29:82 08:ed:b9:e1:51:87 d8:c7:c8:c4:29:82 15Success
May 9 22:02:40 auth d8:c7:c8:c4:29:8b c4:85:08:de:06:d4 d8:c7:c8:c4:29:8b 15Success
May 9 01:25:51 auth 08:ed:b9:e1:51:87 d8:c7:c8:c4:29:8a d8:c7:c8:c4:29:8a 60 -
The output of this command includes the following information:
Column Description
Timestamp
Indicates timestamp for the authentication management frame.
stype
Indicates the type of the packet.
SA
Indicates the source of the packets.
DA
Indicates the destination to which the packets are intended.
BSS
Indicates the BSSID.
Signal
Indicates the signal level.
Misc
Indicates miscellaneous information such as status and other relevant details.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap debug mgmt-frames | 271