Reference Guide

show ap debug radius-statistics
show ap debug radius-statistics
Description
This command displays the RADIUSstatistics for the authentication servers configured on a W-IAP.
Usage Guidelines
Use this command to view the authentication server details.
Example
The output of this command displays general statistics of the authentication servers configured on a W-IAP.
RADIUS Statistics
-----------------
Statistics TerminationServer InternalServer testserver test1234
---------- ----------------- -------------- ---------- --------
In Service: Management Auth Not used Not used Not used Not used
In Service: Example1 Not used Up 67920s Not used Not used
Accounting Requests 0 0 0 0
Raw Requests 0 0 0 0
PAP Requests 0 0 0 0
CHAP Requests 0 0 0 0
MS-CHAP Requests 0 0 0 0
MS-CHAPv2 Requests 0 0 0 0
Mismatch Response 0 0 0 0
Invalid Secret 0 0 0 0
Access-Accept 0 0 0 0
Access-Reject 0 0 0 0
Accounting-Response 0 0 0 0
Access-Challenge 0 0 0 0
Unknown Response code 0 0 0 0
Timeouts 0 0 0 0
AvgRespTime (ms) 0 0 0 0
Total Qequests 0 0 0 0
Total Response 0 0 0 0
Read Error 0 0 0 0
SEQ first/last/free 0/0/0 0/0/0 0/0/0 0/0/0
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.4
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap debug radius-statistics | 277