Reference Guide

28 | ams-identity Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
ams-identity
ams-identity <Name>
Description
This command uniquely identifies the group of W-IAPs managed or monitored by the W-AirWave Management
console. The name can be a location, vendor, department, or any other identifier.
Syntax
Parameter Description
ams-identity <Name>
Configures a name that uniquely identifies the W-IAP on the W-
AirWave Management server. The name defined for this command
will be displayed under the Groups tab in the W-AirWave user
interface.
Usage Guidelines
Use this command to assign an identity for the W-IAPs monitored or managed by the W-AirWave Management
Server.
Example
The following command configures a W-AirWave identifier:
(Instant AP)(config)# ams-identity dell
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode