Reference Guide

Parameter Description
and the amount of time that relationship has existed.
l P = Parent
l C = Child
l N = Neighbor
l B = Blacklisted-neighbor
Flags
This parameter shows additional information about the mesh neighbor. The key
describing each flag is displayed at the bottom of the neighbor list.
RSSI
The Receive Signal Strength Indicator (RSSI) value displayed in the output of this
command represents signal strength as a signal to noise ratio. For example, a
value of 30 would indicate that the power of the received signal is 30 dBm above
the signal noise threshold.
Rate Tx/Rx
The rate, in Mbps, that a neighbor transmits data to or receives data from the
mesh-node specified by the command.
A-Req
Number of association requests from clients.
A-Resp
Number of association responses from the mesh node.
A-Fail
Number of association failures.
Cluster ID
Name of the Mesh cluster that includes the specified AP or BSSID.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap mesh link | 289