Reference Guide

apply
apply {cplogo-install| cplogo-uninstall| debug-command| delta-config}
Description
This command is used to save or apply the configuration settings on the W-IAP.
Syntax
Parameter Description
cplogo-install
Installs the Captive Portal logo on the W-IAP.
cplogo-uninstall
Uninstalls the Captive Portal logo on the W-IAP.
debug-command
Applies the configuration settings from the debug command.
delta-config
Applies the configuration settings from the delta-config command.
Usage Guidelines
Use this command to apply the current configuration settings on the W-IAP.
Example
The following example installs the captive portal logo on a W-IAP.
(Instant AP)(config)# apply cplogo-inistall http://cp.logo.com
The following example uninstalls the captive portal logo on a W-IAP.
(Instant AP)(config)# apply cplogo-inistall http://cp.logo.com
Command History
Version Description
Dell Networking W-Series Instant 6.4.0.2-4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXECmode.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide apply | 31