Reference Guide

show arp

Description

This command displays the Address Resolution Protocol (ARP) entries for the Virtual Controller.

Usage Guidelines

Use this command to view the ARM messages sent or received by the Virtual Controller.

Example

The following example shows the output of show arp command

IP address HW type Flags HW address Mask Device

192.168.10.2 0x1 0x6 D8:C7:C8:C4:42:98 * br0

10.17.88.2 0x1 0x2 00:0B:86:40:1C:A0 * br0

The output of this command includes the following information:

Parameter Description

IP address

Displays the IP address of the device.

HW Type

Displays the type of the device.

Flags

Displays any flags for this AP.

HW address

Displays the MAC address of the device.

Mask

Displays the network mask or the IP address range.

Device

Displays the device used to send ARP requests and replies.

Command History

Version Description

Dell Networking W-Series

Instant 6.2.1.0-3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Privileged EXEC mode

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show arp | 311