Reference Guide

32 | arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
arm
arm
80mhz-support
a-channels <a-channel>
air-time-fairness-mode {<default-access>| <fair-access>| <preferred-access>}
band-steering-mode {balance-bands|prefer-5ghz| force-5ghz| disable}
client-aware
client-match [calc-interval <seconds>| calc-threshold <threshold> | debug <level>| holdtime
<number> | max-adoption <count>| max-request <count> |nb-matching <percentage> | slb-mode
<mode>
g-channels
max-tx-power
min-tx-power
scanning
wide-bands {<none>| <all>| <2.4>| <5>}
no…
Description
This command assigns an Adaptive Radio Management (ARM) profile for a W-IAP and configures ARM features
such as band steering, spectrum load balancing, airtime fairness mode, and access control features.
Syntax
Command/Parameter Description Range Default
80mhz-support
Enables the use of 80 MHz channels on
APs with 5GHz radios, which support a very
high throughput.
NOTE: Only the APs that support 802.11ac
can be configured with 80 MHz channels.
— —
a-channels <a-channel>
Configures 5 GHz channels. — —
air-time-fairness-mode
{<default-access>| <fair-
access>| <preferred-access>}
Allows equal access to all clients on the
wireless medium, regardless of client type,
capability, or operating system and
prevents the clients from monopolizing
resources. You can configure any of the
following modes:
l default-access — To provide access
based on client requests. When this
mode is configured, the per user and
per SSID bandwidth limits are not
enforced.
l fair-access — To allocate Airtime evenly
across all the clients.
l preferred-access — To set a preference
where 11n clients are assigned more
airtime than 11a/11g. The 11a/11g
clients get more airtime than 11b. The
ratio is 16:4:1.
default-
access,fair-
access,
preferred-
access
default-
access
band-steering-mode
{<balance-bands>|<prefer-
5ghz>|<force-5ghz>|
<disable>}
Assigns the dual-band capable clients to
the 5 GHz band on dual-band. It reduces
co-channel interference and increases
available bandwidth for dual-band clients,
because there are more channels on the 5
balance-
bands,
prefer-
5ghz, force-
5ghz,
balance-
bands