Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsW-IAP175P/AC
331332333334335336337338339340
00 8a
acct_session
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
user_role
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
swarm_basic_client_t
08 ed b9 e1 51 7d d8 c7 c8 3d 3d 52 0a 11 58 ba 73 72 6f 79 2d 73 6f 6d 65 74 68 69 6e 67 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8a a9 fe 5a 9a 03 e8 00 00
checksum
02 ec ba ec
The show checksum <mac> command displays the checksum errors associated with the W-IAP clients.
show clients debug and show clients wired debug
The show clients debug command displays detailed information about the clients MAC and IP addresses, client
role, authentication aging time, and accounting intervals, ESSID and BSSID details, VLAN and multicast groups to
which the client is associated, and DHCP roles and options associated with the client. The show clients wired
debug command displays a similar output.
The following example shows the show clients debug command output:
Client List
-----------
Name IP Address MAC Address OS Network Access Point Channel
---- ---------- ----------- -- ------- ------------ -----
169.254.90.154 08:ed:b9:e1:51:7d Network1 10.17.88.186 48-
Type Role Signal Speed (mbps) Auth Age Session Timeout ESSID
---- ---- ------ ------------ -------- --------------- ---
AN admin1 68(good) 6(poor) 0 0
Authenticated DEL Age Vlan Essid Private role info Accounting Session
------------- ---- ---- ---- ------ ------------ ----- ----------------------
no no 5 333(SSID) () 0(0-0) 0
Name Accounting Start time BSSID Idle Timeout csum
---- --------------------- ------ ------------- ----
d8:c7:c8:3d:3d:52 1000 0 2ecbaec(3)
mcast groups Acct Interval Class Attribute Dhcp-Opt Vlan
------------ ------------- ----------------- -------------
224.0.0.252,239.255.255.250,224.0.0.251 0 null 0,(null) Dhcp-Opt role
--------- ,0,0-0
show clients status
The show clients status <mac> command displays the status of a W-IAP client.
show clients roaming
The show clients roaming command displays the MAC address and IP address details of W-IAP from which the
client has roamed and IP address of the W-IAP to which the client is roamed.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show clients | 331