Reference Guide

Command/Parameter Description Range Default
frequency bandwidth available for data
transmission. For high performance, enter
5GHz. If the AP density is low, enter
2.4GHz.
no…
Removes the current value for that
parameter and return it to its default setting
— —
Usage Guidelines
Use this command to configure ARM features on a W-IAP. ARM ensures low-latency roaming, consistently high
performance, and maximum client compatibility in a multi-channel environment. By ensuring the fair distribution of
available Wi-Fi bandwidth to mobile devices, ARM ensures that data, voice, and video applications have sufficient
network resources at all times. ARM allows mixed 802.11ac, a, b, g, and n client types to inter-operate at the highest
performance levels.
Example
The following example configures an ARM profile:
(Instant AP)(config)# arm
(Instant AP)(ARM)# 80mhz-support
(Instant AP)(ARM)# a-channels 44
(Instant AP)(ARM)# min-tx-power 18
(Instant AP)(ARM)# max-tx-power 127
(Instant AP)(ARM)# band-steering-mode prefer-5ghz
(Instant AP)(ARM)# air-time-fairness-mode fair-access
(Instant AP)(ARM)# scanning
(Instant AP)(ARM)# client-aware
(Instant AP)(ARM)# client-match
(Instant AP)(ARM)# wide-bands 5
(Instant AP)(ARM)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.3.1.1-4.0 This command is modified.
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration and ARM configuration sub-mode.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide arm | 35