Reference Guide

358 | show dhcp-allocation Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide

show dhcp-allocation

Description

This command displays information about the DHCP address allocation.

Usage Guidelines

Use this command to view DHCP address allocation for network address translated clients to allow mobility of the

clients across W-IAPs.

Example

The following example shows the output of show dhcp-allocation command:

(Instant AP)# show dhcp-allocation

---------------------/etc/dnsmasq.conf--------------------

listen-address=127.0.0.1

addn-hosts=/etc/ld_eth_hosts

addn-hosts=/etc/ld_ppp_hosts

dhcp-src=192.168.10.1

dhcp-leasefile=/tmp/dnsmasq.leases

dhcp-authoritative

filterwin2k

#magic-vlan

{

vlan-id=3333

dhcp-range=192.168.10.3,192.168.11.254,255.255.254.0,12h

dhcp-option=1,255.255.254.0

dhcp-option=3,192.168.10.1

dhcp-option=6,10.1.1.50

dhcp-option=54,192.168.10.1

}

---------------------/tmp/dnsmasq.leases------------------

Command History

Version Description

Dell Networking W-Series

Instant 6.2.1.0-3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Privileged EXEC mode