Reference Guide

374 | show election DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show election
show election {statistics}
Description
This command shows master W-IAP election statistics.
Syntax
Parameter Description
statistics
Shows master election statistics.
Usage Guidelines
Use this command to view the statistics of the W-IAP selected as Virtual Controller.
Example
The following example shows the output of show election statistics command:
State : Master
master_beacon : sent=8162 rcvd=0
hierarchy_beacon: sent=7685 rcvd=0
hierarchy_ack : sent=0 rcvd=0
beacon_req : sent=0 rcvd=0
Slave->Pot-Master : 0 time
Pot-master->Master: 0 time
Pot-master->Slave : 0 time
spoof arp rcvd: 0
last spoof mac: 00:00:00:00:00:00
The output of this command includes the following information:
Parameter Description
State
Indicates if the W-IAP is provisioned as master.
master_beacon
Displays the number of beacons transmitted and received by the master W-IAP.
hierarchy_beacon
Displays the number of beacons transmitted and received.
hierarchy_ack
Displays the number of beacons transmitted and received.
beacon_req
Displays the number of beacons required.
spoof arp rcvd
Displays the number of ARP spoof attacks detected.
last spoof mac
Displays the MAC address of the last spoof detected.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.