Reference Guide

show fault
show fault [history]
Description
This command displays the list of active faults that occur in the event of a system fault and the faults that were
cleared from the system.
Syntax
Parameter Description
history
Displays the list of faults that were cleared.
Usage Guidelines
Use this command to view the active faults for a W-IAP. Active faults are generated due to system faults.
Example
The following example shows the output for the show fault command:
Active Faults
-------------
Time Number Description
---- ------ -----------
Total number of entries in the queue :0
The following example shows the output for the show fault history command:
Cleared Faults
--------------
Time Number Cleared By Description
---- ------ ---------- -----------
Total number of entries in the queue :0
The output of these commands provide the following information:
Parameter Description
Timestamp
Displays the system time at which an event occurs.
Number
Indicates the sequence
Cleared By
Displays the module which cleared this fault.
Description
Provides a short description of the event details.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show fault | 377