Reference Guide

show ids-protection config
show ids-protection config
Description
This command displays the list of infrastructure protection policies for a W-IAP.
Usage Guidelines
Use this command to view the status of infrastructure protection policies on a W-IAP.
Examples
The following output is displayed for the show ids-protection config command:
Wireless Containment :none
Wired Containment :off
infrastructure protection level :off
---------------------------------------------------
Policies Status Low High
-------- ------ --- ----
protect-ssid disable enable enable
rogue-containment disable enable enable
protect-adhoc-network disable disable enable
protect-ap-impersonation disable disable enable
client protection level :off
---------------------------------------------------
Policies Status Low High
-------- ------ --- ----
protect-valid-sta disable enable enable
protect-windows-bridge disable disable enable
Parameter Description
Infrastructure
protection level
Indicates if the protection level for the policies is set to off, low, medium, or high.
Policies
Displays the list of wired and wireless network infrastructure protection policies.
Status
Indicates if a policy is enabled or disabled.
Low
Indicates if the protection level for a policy is set to low.
Medium
Indicates if the protection level for a policy is set to medium.
High
Indicates if the protection level for a policy is set to high.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ids-protection config | 383