Reference Guide

388 | show inbound-firewall-rules Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show inbound-firewall-rules
show inbound-firewall-rules
Description
This command displays the details of inbound firewall rules configured on a W-IAP.
Usage Guidelines
Use this command to view the details of the inbound firewall rules configured for a W-IAP network.
Example
The following output is displayed for the show inbound-firewall-rules command:
Access Rules
------------
Src IP Src Mask Dest IP Dest Mask Dest Match Protocol (id:sport:eport) Application Action Log
TOS 802.1P Blacklist App Throttle (Up:Down) Mirror DisScan ClassifyMedia
------ -------- ------- --------- ---------- ------------------------- ----------- ------ ---
--- ------ --------- ---------------------- ------ ------- -------------
any any any any match h323-tcp permit
any any 192.0.2.0 255.255.255.0 match h323-udp permit
The output of this command displays information about the inbound firewall access rule configuration parameters,
which indicate whether a particular type of traffic is to allowed to a particular destination from the source subnet, and
the service and protocol in use. It also indicates if other options such as logging and prioritizing traffic are enabled
when the rule is triggered.
Command History
Version Description
Dell Networking W-Series Instant
6.4.0.2-4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode