Reference Guide
398 | show l2tpv3 session Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show l2tpv3 session
show l2tpv3 session status
Description
This command displays the L2TPsession connectivity status.
Usage Guidelines
Use this command to view the session connectivity status.
Example
The following example shows the output of the show l2tpv3 session status command:
Session 1821009927 on tunnel 858508253:-
type: LAC Incoming Call, state: ESTABLISHED
created at: Jul 2 04:58:45 2013
administrative name: 'test_session' (primary)
created by admin: YES, peer session id: 12382
session profile name: test_session_primary
data sequencing required: OFF
use data sequence numbers: OFF
Peer configuration data:-
data sequencing required: OFF
framing types:
data rx packets: 16, rx bytes: 1560, rx errors: 0 rx cookie error 0
data tx packets: 6, tx bytes: 588, tx errors: 0
The output of this command shows the session connectivity status, tunnel creation time. configuration data, data
frame types and so on.
Command History
Version Description
Dell Networking W-Series
Instant 6.2.1.0-3.4
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode