Reference Guide

40 | blacklist-time Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
blacklist-time
blacklist-time <seconds>
Description
This command sets the duration in seconds for which the clients can be blacklisted due to an ACL rule trigger.
Syntax
Parameter Description Default
blacklist-time <seconds>
Sets the duration in seconds for blacklisting clients due
to an ACL rule trigger.
3600
Usage Guidelines
Use this command to configure the duration in seconds for which the clients can be blacklisted when the blacklisting
rule is triggered.
Examples
The following command configures the duration for blacklisting clients:
(Instant AP) (config) # blacklist-time 30
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode