Reference Guide

show log user-debug
show log user-debug [count]
Description
This command shows the W-IAP user debug logs.
Syntax
Parameter Description
count
Starts displaying the log output from the specified number of lines from the end of
the log.
Command History
Version Description
Dell Networking W-Series Instant
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show log user-debug | 425