Reference Guide

426 | show log vpn-tunnel Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show log vpn-tunnel
show log vpn-tunnel [count]
Description
This command shows VPN tunnel status for the W-IAP.
Syntax
Parameter Description
count
Starts displaying the log output from the specified number of lines from the end of
the log.
Usage Guidelines
Use this command without the optional <count> parameter to view a complete table of VPN tunnel status. Include
the <count> parameter to display status for the specified count of VPN tunnels.
Command History
Version Description
Dell Networking W-Series Instant
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode