Reference Guide

cellular-uplink-profile
cellular-uplink-profile <profile>
4g-usb-type <4G-usb-type>
modem-isp <modem_isp>
modem-country <modem-country>
usb-auth-type <usb_authentication_type>
usb-dev <usb-dev>
usb-dial <usb-dial>
usb-init <usb-init>
usb-modeswitch <usb-modeswitch>
usb-passwd <usb-passwd>
usb-tty <usb-tty>
usb-type <usb-type>
usb-user <usb-user>
modem-isp <modem_isp>
modem-country <modem-country>
no…
Description
This command provisions the cellular (3G/4G) uplink profiles on a W-IAP.
Syntax
Parameter Description Range Default
cellular-uplink-profile
<profile>
Configures a 3G or 4G cellular
profile for a W-IAP.
— —
4g-usb-type <4G-usb-type>
Configures the driver type for
the 4G modem.
ether-lte,
pantech-lte,
none
—
modem-isp <modem_isp>
Specifies the name of the ISP
to connect.
— —
modem-country <modem-country>
Specifies the country for the
deployment.
— —
usb-auth-type <usb_
authentication_type>
Specifies the authentication
type for USB.
PAP, CHAP PAP
usb-dev <usb-dev>
Specifies the device ID of the
USB modem.
— —
usb-dial <usb-dial>
Specifies the parameter to dial
the cell tower.
— —
usb-init <usb-init>
Specifies the parameter name
to initialize the modem.
— —
usb-passwd <usb-passwd>
Specifies the password for the
account associated with the
subscriber of the selected ISP.
— —
usb-modeswitch <usb-
modeswitch>
Specifies the parameter used
to switch modem from storage
mode to modem mode.
— —
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide cellular-uplink-profile | 43