Reference Guide

430 | show mgmt-user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show mgmt-user
show mgmt-user
Description
This command displays the credentials for the admin users for the W-IAP management interface.
Usage Guidelines
Use this command to view the admin user credentials required for accessing the W-IAP and external server
configuration details for the management users.
Examples
The following output is displayed for the show mgmt-user command:
Server Load Balancing :Disabled
Local User DB Backup :Disabled
RADIUS Servers
--------------
Name IP Address Port Key Timeout Retry Count
---- ---------- ---- --- ------- -----------
Server1 192.0.2.2 1616 23567aea01cb66d354d2b1f5d13df7f85d4a d1d1f181fb4827 5
NAS IP Address NAS Identifier In Use RFC3576
-------------- -------------- ------ -------
Yes
Management User Table
---------------------
Name Password Type
---- -------- ----
admin admin Admin
The output of this command provides the following information:
Column Description
Server Load Balancing
Indicates if load balancing is enabled when two authentication servers
are used.
Local User DB Backup
Indicates if the backing up of the local user database is enabled.
Name
Indicates the name of the RADIUS server.
IP address
Indicates the IP address of the RADIUS server.
Port
Indicates the authorization port number of the RADIUS server.
Key
Indicates the key for communicating with the RADIUS server.
Timeout
Indicates timeout value in seconds for one RADIUS request.
Retry count
Indicates the maximum number of authentication requests sent to the
RADIUSserver.
NAS IP address
Displays the IP address of the Network Access Server (NAS) if NAS is
configured.
NAS Identifier
Indicates the NAS identifier to be sent with the RADIUS requests if