Reference Guide

436 | show port status Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show port status
show port status
Description
Displays the activity statistics on each of the port on the controller.
Example
The following example shows the output of the show port status command:
(Instant AP)# show port status
Port Type Admin-State Oper-State
---- ---- ----------- ----------
bond0 GE down up
Parameter Description
Port
Displays the port number on the controller.
Type
Displays the port type.
Admin-State
Displays if the port is enabled or disabled.
Oper-State
Displays if the port is currently up and running.
Command History
Version Description
Dell Networking W-
Series Instant
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platforms Command Mode
All platforms Privileged Exec mode