Reference Guide

show radius-servers support
show radius-servers support
Description
This command displays the RADIUS server configuration details for a W-IAP.
Usage Guidelines
Use this command to view the RADIUS server information for a W-IAP.
Example
The following example shows the output of show radius-servers support command:
RADIUS Servers
--------------
Name IP Address Port Acctport Key
---- ---------- ---- -------- ----
Server1 192.0.2.2 1616 1813 23567aea01cb66d354d2b1f5d13df7f85d4a
Timeout Retry Count NAS IP Address NAS Identifier In Use RFC3576
---- ---------- ------------ --------------- ------- ---------------
d1d1f181fb4827 5 Yes 0
Airgroup RFC3576-ONLY Airgroup RFC3576 port Deadtime
-------- ------------ ---------------------- ------------
5
The output of this command provides the following information:
Parameter Description
Name
Indicates the name of the RADIUS server.
IP address
Indicates the IP address of the RADIUS server.
Port
Indicates the authorization port number of the RADIUS server.
AcctPort
Indicates the authorization port number of the RADIUS server.
Key
Indicates the key for communicating with the RADIUS server.
Timeout
Indicates timeout value in seconds for one RADIUS request.
Retry count
Indicates the maximum number of authentication requests sent to the
RADIUSserver.
NAS IP address
Displays the IP address of the Network Access Server (NAS) if NAS is configured.
NAS Identifier
Indicates the NAS identifier to be sent with the RADIUS requests.
In Use
Indicates if the server is in use.
RFC3576
Indicates if the W-IAPs are configured to process RFC 3576-compliant Change of
Authorization (CoA).
Airgroup RFC3576-ONLY
Indicates if W-IAPs are configured to be RFC 3576 compliant only.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show radius-servers support | 443