Reference Guide

show snmp trap-queue

Description

This command displays the list of SNMP traps in queue.

Usage Guidelines

Use this command to view the SNMP traps in queue.

Example

The following example shows the partial output of show snmp trap-queue command:

2013-05-12 14:05:27 An AP (NAME d8:c7:c8:cb:d4:20 and MAC d8:c7:c8:cb:d4:20 on RADIO 2)

detected an interfering access point (BSSID 00:24:6c:80:7d:11 and SSID NTT-SPOT on CHANNEL 1).

2013-05-12 14:09:53 An AP (NAME d8:c7:c8:cb:d4:20 and MAC d8:c7:c8:cb:d4:20 on RADIO 2)

detected an interfering access point (BSSID 6c:f3:7f:45:5d:20 and SSID 7SPOT on CHANNEL 1).

2013-05-12 14:10:36 An AP (NAME d8:c7:c8:cb:d4:20 and MAC d8:c7:c8:cb:d4:20 RADIO 2) changed

its channel from channel 1 (secchan offset 1) to channel 7 (secchan offset 1) due to reason

12.

Command History

Version Description

Dell Networking W-Series Instant 6.2.1.0-

3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Privileged EXEC mode

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show snmp trap-queue | 453