Reference Guide

show swarm
show swarm {state|mode}
Description
This command displays the current status of the W-IAP cluster and indicates if W-IAPs are in a cluster or standalone
mode.
Usage Guidelines
Use this command to view the current status of the W-IAP cluster and to view information about the functioning
mode of the W-IAP cluster.
Example
The following example shows the output of show swarm state command:
AP Swarm State :swarm_config_sync_complete
mesh ldart State :suspending
The output of this command describes synchronization status of the W-IAP cluster.
The following text shows an example output for the show swarm mode command:
Swarm Mode :Cluster
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show swarm | 463