Reference Guide

show syslog-level
show syslog-level
Description
This command displays the Syslog logging levels configured for a W-IAP.
Usage Guidelines
Use this command to view the Syslog logging facilities and the associated logging level.
Example
The following example shows to output of the show syslog-level command:
Logging Level
-------------
Facility Level
-------- -----
ap-debug debug
network debug
security debug
system debug
user debug
user-debug debug
wireless debug
The output of this command provides the following information:
Parameter Description
Facility
Displays the list of logging facilities configured on the W-IAP.
ap-debug
Generates a log for the AP device for debugging purposes.
network
Generates a log when there is a change in the network, for example, when a new W-IAP
is added to a network.
security
Generates a log for network security, for example, when a client connects using wrong
password.
system
Generates a log about the system configuration and status.
user
Generates a log for the W-IAP clients.
user-debug
Generates a detailed log about the clients for debugging purposes.
wireless
Generates a log about radio configuration.
syslog-level
<level>
Displays any of the following Syslog logging level configured for the Syslog facility.
l Emergency — Panic conditions that occur when the system becomes unusable.
l Alert — Any condition requiring immediate attention and correction.
l Critical — Any critical conditions, for example, hard drive error.
l Errors —Error conditions.
l Warning — Warning messages.
l Notice — Significant events of a non-critical and normal nature. The default value for
all Syslog facilities.
l Informational — Messages of general interest to system users.
l Debug — Messages containing information useful for debugging.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show syslog-level | 465