Reference Guide
show tacacs-servers
show tacacs-servers
Description
This command displays all the tacacs servers configured on a W-IAP.
Usage Guidelines
Use this command to view the list of tacacs servers available on a W-IAP.
Example
The following example shows the output of the show tacacs-servers command:
TACACSServers
--------------
Name IPAddress Port Key Timeout Retry Count In Use
---- ---------- ---- --- ------- ----- ----- ------
tacacs1 10.64.16.240 49 pass123 20 1 Yes
tacacs2 192.168.0.100 49 pass456 10 2 No
The output of this command provides the following information:
Parameter Description
Name
Indicates the list of tacacs server available on a W-IAP.
IP Address
Displays the IP address for each tacacs server.
Port
Indicates the TCPPort in use for the tacacs server.
key
Indicates the shared secret key used to authenticate and access tacacs server.
Command History
Version Description
Dell Networking W-Series
Instant 6.4.0.2-4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show tacacs-servers | 467