Reference Guide

l Huawei 3276s-150
l MC551L
l Pantech UML295
l Pantech UML290
When UML290 runs in auto detect mode, the modem can switch from 4G network to 3G network or vice-versa
based on the signal strength. To configure the UML290 for the 3G network only, manually set the USB type to
pantech-3g. To configure the UML290 for the 4G network only, manually set the 4G USB type to pantech-lte.
Example
The following example configures a cellular uplink profile:
(Instant AP)(config) # cellular-uplink-profile
(Instant AP)(cellular-uplink-profile)# 4g-usb-type pantech-lte
(Instant AP)(cellular-uplink-profile)# modem-country India
(Instant AP)(cellular-uplink-profile)# modem-isp example
(Instant AP)(cellular-uplink-profile)# usb-auth-type PAP
(Instant AP)(cellular-uplink-profile)# usb-user user1
(Instant AP)(cellular-uplink-profile)# usb-passwd user123
(Instant AP)(cellular-uplink-profile)# modem-country India
(Instant AP)(cellular-uplink-profile)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and cellular uplink profile configuration sub-
mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide cellular-uplink-profile | 47