Reference Guide

482 | show vpn Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
l vpn monitor-pkt-send-freq
l vpn ikepsk
l gre type
l gre primary
l gre per-ap-tunnel
The following example shows the output displayed for show vpn status command:
profile name:default
--------------------------------------------------
current using tunnel :unselected tunnel
ipsec is preempt status :disable
ipsec is fast failover status :disable
ipsec hold on period :600
ipsec tunnel monitor frequency (seconds/packet) :5
ipsec tunnel monitor timeout by lost packet cnt :2
ipsec primary tunnel crypto type :Cert
ipsec primary tunnel peer address :N/A
ipsec primary tunnel peer tunnel ip :N/A
ipsec primary tunnel ap tunnel ip :N/A
ipsec primary tunnel current sm status :Init
ipsec primary tunnel tunnel status :Down
ipsec primary tunnel tunnel retry times :0
ipsec primary tunnel tunnel uptime :0
ipsec backup tunnel crypto type :Cert
ipsec backup tunnel peer address :N/A
ipsec backup tunnel peer tunnel ip :N/A
ipsec backup tunnel ap tunnel ip :N/A
ipsec backup tunnel current sm status :Init
ipsec backup tunnel tunnel status :Down
ipsec backup tunnel tunnel retry times :0
ipsec backup tunnel tunnel uptime :0
The show vpn status command displays the current status of VPN connection, IP address configured for
VPN/IPSec connections, and the tunnel details.
Command History
Version Description
Dell Networking W-Series Instant 6.4.0.2-4.1 The tunnels keyword was added.
Dell Networking W-Series Instant 6.3.1.1-4.0
The command output is modified.
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode