Reference Guide

484 | show wifi-uplink Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show wifi-uplink
show wifi-uplink {auth log |config | status}
Description
This command displays the configuration details, the status, and authentication log for the Wi-Fi uplinks configured
on a W-IAP.
Syntax
Parameter Description
auth log
Displays the authentication configuration details and an authentication log.
config
Displays the Wi-Fi configuration parameters enabled on a W-IAP.
status
Displays the status of the Wi-Fi uplink.
Usage Guidelines
Use this command to view the information about status and configuration details for the Wi-Fi uplink enabled on a W-
IAP.
Example
show wifi-uplink auth log
The following output is displayed for the show wifi-uplink auth log command:
----------------------------------------------------------------------
wifi uplink auth configuration:
----------------------------------------------------------------------
----------------------------------------------------------------------
wifi uplink auth log:
----------------------------------------------------------------------
[1536]2013-05-08 23:42:06.647: Global control interface '/tmp/supp_gbl'
show wifi-uplink config
The following output is displayed for the show wifi-uplink config command:
ESSID :Wifi
Cipher Suite :wpa-tkip-psk
Passphrase :test1234
Band :dot11a
The output for this command displays the following information:
Parameter Description
ESSID
Displays the name of the network for which the Wi-Fi uplink is configured.
Cipher Suite
Displays the encryption settings configured for the Wi-Fi uplink. For example,
wpa-tkip-psk or wpa2-ccmp-psk.
Passphrase
Displays the WPA passphrase configured for the Wi-Fi uplink.
uplink-band <band>
Displays the band configured for the Wi-Fi uplink connection. For example,
dot11a and dot11g.