Reference Guide

488 | show wired-port-settings Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show wired-port-settings
show wired-port-settings
Description
This command displays the list of wired profiles configured on a W-IAP.
Usage Guidelines
Use this command to view the wired profiles configured on a W-IAP.
Example
The following example shows the output of show wired-port-settings command:
Wired Port Profiles
-------------------
Name VLAN Mode Allowed VLANs Native VLAN Admin Status Role Speed
---- --------- ------------- ----------- ------------ ---- ----
wiredProf1 Access all guest Up wired-instant auto
WiredProf2 Trunk all 1 Down WiredProf2 auto
Duplex POE In Use Authentication Method
----- ----- ---- ---------------------------
auto Yes Yes None
full No Yes None
Port Profile Assignments
------------------------
Port Profile Name
---- ------------
0 default_wired_port_profile
1 example1-crash
2 wired-instant
3 wired-instant
4 wired-instant
The output of this command provides the following information:
Column Description
Name
Indicates the name of the wired port profile.
VLAN Mode
Indicates the name of switchport mode for the wired profiles. The VLAN modes
can be Access or Trunk.
Allowed VLAN
Indicates the list of allowed VLANs. The Allowed VLAN refers to the VLANs
carried by the port in Access mode.
Native VLAN
Indicates the values assigned for Native VLAN. A VLAN that does not have a
VLAN ID tag in the frames is referred to as Native VLAN.
Admin Status
Indicates the status of admin port.
Role
Indicates the role assigned to the wired profile users.
Speed
Indicates the speed of wired client traffic.
duplex
Indicates if the client traffic duplexing full, half, or automatically assigned based