Reference Guide

512 | virtual-controller-country Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
virtual-controller-country
virtual-controller-country <country-code>
no…
Description
This command configures the location of the W-IAP.
Syntax
Parameter Description
virtual-controller-country
<country-code>
Specifies the country of operation for a W-IAP.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure the country code for W-IAPs.
Example
The following example configures a country code for W-IAP:
(Instant AP)(config)# virtual-controller-country US
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode