Reference Guide

virtual-controller-ip
virtual-controller-ip <IP-address>
Description
This command configures an IP address for the Virtual Controller.
Syntax
Parameter Description
virtual-controller-ip <IP-
address>
Assigns an IP address for the Virtual Controller.
Usage Guidelines
Use this command to configure an IP address for the Virtual Controller.
Example
The following example assigns an IP address for the Virtual Controller:
(Instant AP)(config)# virtual-controller-ip 192.0.2.2
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide virtual-controller-ip | 513