Reference Guide

vpn hold-time
vpn hold-time <seconds>
no...
Description
This command configures the time interval after which the W-IAP can switch over to the primary host when
preemption is enabled.
Syntax
Parameter Description
vpn hold-time <seconds>
Configures a time period in seconds after which the W-IAPs can switch to
primary VPN server.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure a period to hold on switching to the primary server when pre-emption is enabled.
Example
The following example configures a hold-time to switch to the primary host server:
(Instant AP)(config)# hold-time <seconds>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide vpn hold-time | 519