Reference Guide
526 | vpn reconnect-user-on-failover Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
vpn reconnect-user-on-failover
vpn reconnect-user-on-failover
no…
Description
This command enables the users to reconnect to the VPN when the primary VPN tunnel fails.
Syntax
Parameter Description
vpn reconnect-user-on-
failover
Enables users to reconnect to the VPN during a VPN failover.
no…
Removes the configuration.
Usage Guidelines
Use this command to allow the users to reconnect to the VPN after a VPN failover. When enabled , the W-IAP
reconnects the user during a VPNfailover.
Example
The following example enables users to reconnect to VPN after a failover:
(Instant AP)(config)# vpn reconnect-user-on-failover
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.4
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode