Reference Guide

530 | wired-port-profile DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
captive-portal{<type>
[exclude-uplink <types>]
|external[exclude-uplink
<types>| profile <name>
[exclude-uplink <types>]]}
Enables internal or external captive
portal authentication for the wired profile
users.
You can also disable redirection to the
captive portal based on the type of
current uplink.
If the external captive profiles are
created, you can specify the profile name
by using the external and profile
keywords and associated parameters.
— —
content-filtering
Enables content filtering — —
dot1x
Enables 802.11X authentication for the
Wired profile users
— Disable
d
duplex <duplex>
Assigns a value for duplexing client traffic
based on the capabilities of the client, the
AP, and the cable. You can specify full,
half, or auto.
full, half, auto auto
l2-auth-failthrough
Allows the clients to use 802.1X
authentication when MAC authentication
fails.
— Disable
d
mac-authentication
Enables MAC authentication — Disable
d
native-vlan <vlan>
Configures a value for Native VLAN. A
VLAN that does not have a VLAN ID tag
in the frames is referred to as Native
VLAN.
1-4093 —
poe
Enables power over Ethernet — Enabled
radius-reauth-interval
<minutes>
Configures a reauthentication interval at
which all associated and authenticated
clients must be reauthenticated.
— —
server-load-balancing
Enables load balancing across two
RADIUS servers if two authentication
servers are configured for the SSID.
— Enabled
set-role <attribute>
{{equals| not-equal|starts-
with|
ends-with| contains}
operator>
<role>| value-of}
Assigns a user role to the clients. The first
rule that matches the configured
condition is applied.
You can specify any of the following
conditions:
l contains — The rule is applied only if
the attribute value contains the
specified string.
l ends-with — The rule is applied only if
the attribute value ends with the
specified string.
— —