Reference Guide

Command/Parameter Description Range Default
l equals — The rule is applied only if the
attribute value is equal to the
specified string.
l not-equals — The rule is applied only
if the attribute value is not equal to the
specified string.
l starts-with — The rule is applied only if
the attribute value begins with the
specified string.
l value-of - This rule sets the user role
to the value of the attribute returned.
To set a user role, the value of the
attribute must already be configured
on the W-IAP.
set-role-machine-auth
<machine-only><user-only>
Configures a machine authentication
rule.
You can assign different rights to clients
based on whether their hardware device
supports machine authentication.
Machine authentication is only supported
on Windows devices, so this can be used
to distinguish between Windows devices
and other devices such as iPads.
— —
set-role-mac-auth <mac-
only>
Configures a MAC authentication based
user role.
— —
set-role-pre-auth <role>
Configures a pre-authentication role to
allow some access to the guest users
before the client authentication.
— —
set-role-unrestricted
Configures unrestricted access control. — —
set-vlan <attribute>
{equals|not-equals| starts-
with|
ends-with| contains}
<operator>
<VLAN-ID>| value-of}
Assigns a VLAN to the clients. The first
rule that matches the configured
condition is applied.
You can specify any of the following
conditions:
l contains — The rule is applied only if
the attribute value contains the
specified string.
l ends-with — The rule is applied only if
the attribute value ends with the
specified string.
l equals — The rule is applied only if the
attribute value is equal to the
specified string.
l not-equals — The rule is applied only
if the attribute value is not equal to the
specified string.
l starts-with — The rule is applied only if
the attribute value begins with the
specified string.
l value-of - This rule sets the VLANto
— —
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide wired-port-profile | 531