Reference Guide

532 | wired-port-profile DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
the value of the attribute returned. To
set a user role, the value of the
attribute must already be configured
on the W-IAP.
shutdown
Shuts down the admin status port up, down up
spanning-tree
Enables Spanning Tree Protocol on the
wired profile.
STP ensures that there are no loops in
any bridged Ethernet network and
operates on all downlink ports,
regardless of forwarding mode. STP will
not operate on the uplink port and is
supported only on W-IAPs with three or
more ports. By default Spanning Tree is
disabled on wired profiles.
— —
speed <speed>
Assigns a value for indicating speed of
client traffic based on the capabilities of
the client, the AP, and the cable.
10,100,200, auto auto
switchport-mode <mode>
Defines the switchport mode for the wired
profile.
You can specify any of the following
modes:
l Access — Use this mode to allow the
port to carry a single VLAN specified
as the native VLAN.
l Trunk — Use this mode to allow the
port to carry packets for multiple
VLANs specified as allowed VLANs.
access, trunk trunk
type <type>
Defines the primary usage of the wired
profile.
employee, guest employ
ee
uplink-enable
Enables uplink for the wired profile — —
no…
Removes any existing configuration — —
Usage Guidelines
Use this command to create a wired profile for employee and guest users. The Ethernet ports allow third-party
devices such as VoIP phones or printers (which support only wired connections) to connect to the wireless network.
You can also configure an Access Control List (ACL) for additional security on the Ethernet downlink.
Example
The following example configures a wired profile for an employee network:
(Instant AP)(config)# wired-port-profile employeeWired1
(Instant AP)(wired ap profile"employeeWired1")# type employee
(Instant AP)(wired ap profile"employeeWired1")# speed auto
(Instant AP)(wired ap profile"employeeWired1")# duplex auto
(Instant AP)(wired ap profile"employeeWired1")# no shutdown
(Instant AP)(wired ap profile"employeeWired1")# poe
(Instant AP)(wired ap profile"employeeWired1")# uplink-enable
(Instant AP)(wired ap profile"employeeWired1")# content-filtering