Reference Guide

534 | wlan access-rule Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
wlan access-rule
wlan access-rule <name>
bandwidth-limit {downstream <kbps>| upstream <kbps>| peruser {downstream <kbps>| upstream
<kbps>}}
calea
captive-portal {external [profile <name>]|internal}
index <index>
rule <dest> <mask> <match> {<protocol> <start-port> <end-port> {permit|deny|src-nat|dst-nat
{<IP-address> <port>| <port>}}| app <app> {permit| deny}| appcategory <appgrp>| webcategory
<webgrp> {permit| deny}| webreputation <webrep> [<option1....option9>]
vlan <vlan-id>
no…
Description
This command configures access rules for WLAN SSID or wired profile.
Syntax
Command/Parameter Description Range Default
wlan access-rule <name>
Specifies the profile name for which
the access rule is configured.
— —
bandwidth-limit {downstream
<kbps>| upstream <kbps>|
peruser {downstream
<kbps>| upstream <kbps>}}
Assign bandwidth contracts to user
roles.
The administrator can assign a
bandwidth contract configured in Kbps
to upstream (client to the W-IAP) or
downstream (W-IAP to clients) traffic for
a user role.
If you want to assign a bandwidth
contract specific for each user, you can
run the command with peruser
parameter.
The bandwidth contract will not be
applicable to the user traffic on the
bridged out (same subnet)
destinations.
NOTE: In the earlier releases,
bandwidth contract could be assigned
per SSID. In the current release, the
bandwidth contract can also be
assigned per SSID user. If the
bandwidth contract is assigned for an
SSID in Instant 6.2.1.0-3.4.0.0 image
and when the W-IAP is upgraded to
6.3.1.1-4.0 release version, the
bandwidth configuration per SSID will
be treated as per-user downstream
bandwidth contract for that SSID.
1-65535 Kbps —
calea
Creates an access rule for CALEA
integration.
— —
captive-portal
{external [profile<name>]
|internal}
Configures a captive-portal role, to
assign to the users role after a
successful authentication.
— —
<index>
Creates an index entry for access — —