Reference Guide

536 | wlan access-rule Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
of applications,
run the show dpi
app all
command.
appcategory <appgrp>
Specifies a rule to allow or deny
access to a specific category of
application.
To view the list
of application
categories, run
the show dpi
appcategory all
command.
—
webcategory <webgrp>
Specifies a rule to allow or deny
access to websites based on website
category.
To view the list
of website
categories, run
the show dpi
webcategory all
command.
—
webreputation <webrep>
Specifies a rule to allow or deny
access to websites based on security
rating.
l trustworthy-
sites
l low-risk-sites
l moderate-
risk-sites
l suspicious-
sites
l high-risk-
sites
—
permit
Creates a rule to allow the specified
packets.
— —
deny
Creates a rule to reject the specified
packets
— —
<option1…option9>
Allows you to specify any of the
following options:
l Log —Creates a log entry when this
rule is triggered.
l Blacklist — Blacklists the client
when this rule is triggered.
l Classify-media — Performs a packet
inspection on all non-NAT traffic
and marks the critical traffic.
l Disable-scanning — Disables ARM
scanning when this rule is
triggered.
l DSCP tag — Specifies a DSCP
value to prioritize traffic when this
rule is triggered.
l 802.1p priority — Sets an 802.1p
priority.
l Application throttling: To set a
bandwidth limit based on
application, application category,
web category or website reputation,
— —