Reference Guide

wlan auth-server
wlan auth-server <auth_profile_name>
acctport <accounting-port>
cppm-rfc3576-only
cppm-rfc3576-port <rfc3576-port>
deadtime <time>
drp-ip <IP-address> <mask> vlan <vlan> gateway <gateway-IP-address>
ip <IP-address>
key <key>
nas-id <NAS-ID>
nas-ip <IP-address>
port <port-name>
retry-count <count>
rfc3576
timeout <seconds>
no…
Description
This command configures an external RADIUS and CPPMserver for user authentication.
Syntax
Command/Parameter Description Range Default
wlan auth-server <server-
profile>
Configures the external RADIUS server
authentication profile.
— —
acctport <accounting-port>
Configures the accounting port number
used for sending accounting records to
the RADIUS server.
— 1813
cppm-rfc3576-only
Configures a CPPM server used for
AirGroup CoA (Change of
Authorization) with RFC3576 only.
The CPPM server acts as a RADIUS
server and asynchronously provides
the Air Group parameters for the client
device, including shared user, shared
role and shared location.
— —
cppm-rfc3576-port <rfc3576-
port>
Configures the port number for sending
AirGroup CoA, instead of the standard
CoA port.
— 5999
deadtime <time>
Configures a dead time interval for the
authentication server.
When two or more authentication
servers are configured on the W-IAP
and a server is unavailable, the dead
time configuration determines the
duration for which the authentication
server would be available if the server
is marked as unavailable.
1—1440
minutes
5
drp-ip <IP-address> <mask>
vlan <vlan> gateway <gateway-
Configures the IP address, net mask
and VLAN,which will be used as
— —
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide wlan auth-server | 539