Reference Guide

540 | wlan auth-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
IP-address>
source address and VLAN for
RADIUSpackets.
NOTE: Before configuring DRP IP
address, ensure that dynamic RADIUS
proxy is enabled, and a static Virtual
Controller IP is configured.
ip <IP-address>
Configures the IPaddress of the
RADIUS server
— —
key <key>
Configures a shared key
communicating with the external
RADIUS server.
— —
nas-id <NAS-ID>
Configures Network Attached Storage
(NAS) identifier strings for RADIUS
attribute 32, which is sent with RADIUS
requests to the RADIUS server.
— —
nas-ip <IP-address>
Configures the Virtual Controller IP
address as the NAS address which is
sent in data packets.
— —
port <port-name>
Configures the authorization port
number of the external RADIUS server.
— 1812
retry-count <count>
Configures the maximum number of
authentication requests that can be sent
to the server group.
1-5 3
rfc3576
Allows the W-IAPs to process RFC
3576-compliant Change of
Authorization (CoA) and disconnect
messages from the RADIUS server.
Disconnect messages cause a user
session to be terminated immediately,
whereas the CoA messages modify
session authorization attributes such as
data filters.
— Disabled
timeout <seconds>
Configures a timeout value in second to
determine when a RADIUS request
must expire.
The W-IAP retries to send the request
several times (as configured in the
Retry count), before the user gets
disconnected. For example, if the
Timeout is 5 seconds, Retry counter is
3, user is disconnected after 20
seconds.
1 to 30
seconds
5
no…
Removes the configuration. — —