Reference Guide

546 | wlan ldap-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
wlan ldap-server
wlan ldap-server <server-name>
admin-dn <domain-name>
admin-password <password>
base-dn <base_domain-name>
deadtime <time>
filter <filter>
key-attribute <key-attribute>
ip <IP-address>
port <port-name>
timeout <seconds>
retry-count <count>
no...
Description
This command configures a Lightweight Directory Access Protocol (LDAP) server for user authentication on the
Virtual Controller.
Syntax
Command/Parameter Description Range Default
wlan ldap-server <server-name>
Configures an LDAP authentication
server.
— —
admin-dn <domain-name>
Configures a distinguished name for
the administrator with read and
search privileges across all the
entries in the LDAP database.
The user need not have write
privileges, but the user must be able
to search the database, and read
attributes of other users in the
database.
— —
admin-password <password>
Configures a password for
administrator.
— —
base-dn <base-domain-name>
Configures a distinguished name for
the node which contains the entire
user database.
— —
deadtime <time>
Configures a dead time interval for
the authentication server.
When two or more authentication
servers are configured on the W-IAP
and a server is unavailable, the dead
time configuration determines the
duration for which the authentication
server would be available if the server
is marked as unavailable.
1—1440
minutes
5
filter <filter>
Configures the filter to apply when
searching for a user in the LDAP
database.
strings (objectclass=*)