Reference Guide

550 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
internal server.
bandwidth-limit
<limit>
Configures an aggregate amount
of bandwidth that each radio is
allowed to provide for the
connected clients.
1—65535 —
blacklist
Enables dynamic blacklisting of
clients.
— —
broadcast-filter <type>
Configures broadcast filtering
parameters:
You can configure any of the
following filtering parameters:
l All—When set to All, the W-IAP
drops all broadcast and
multicast frames except DHCP
and ARP.
l ARP—When set to ARP, the W-
IAP converts ARP requests to
unicast and send frames
directly to the associated client.
l Disabled— When set to
Disabled, all broadcast and
multicast traffic is forwarded.
All, ARP,
Disabled
Disabled
captive-portal
{<type>[exclude-uplink <types>]
|external[exclude-uplink
<types>|
profile <name>[exclude-uplink
<types>]]}
Configures captive portal
authentication for the SSID.
If the external captive profiles are
created, you can specify the profile
name by using the external and
profile keywords and associated
parameters.
— —
You can also exclude an uplink
type for the captive portal based
SSID profiles. When an uplink type
is selected for the exclude-uplink
option, redirection to the captive
portal based on the type of
specified uplink is disabled.
3G,4G,
wifi,ethernet
—
content-filtering
Routes all DNS requests for the
non-corporate domains to
OpenDNS on this network.
— Disabled
deny-inter-user-bridging
Disables the bridging traffic
between two clients connected to
the same SSID on the same VLAN.
When inter-user bridging is
disabled, the clients can connect to
the Internet, but cannot
communicate with each other, and
the bridging traffic between the
clients is sent to the upstream
device to make the forwarding
— —