Reference Guide

552 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
for the SSID profile.
The DTIMinterval determines how
often the W-IAP should deliver the
buffered broadcast and multicast
frames to associated clients in the
powersaving mode.
When configured, the client checks
for buffered data on the W-IAP at
the specified number of beacons.
You can also configure a higher
value for DTIM interval for power
saving.
dynamic-multicast-optimization
Allows the W-IAP to convert
multicast streams into unicast
streams over the wireless link.
Enabling Dynamic Multicast
Optimization (DMO) enhances the
quality and reliability of streaming
video, while preserving the
bandwidth available to the non-
video clients.
NOTE: When you enable DMO on
multicast SSID profiles, ensure that
the DMO feature is enabled on all
SSIDs configured in the same
VLAN.
— Disabled
enable
Re-enables the deactivated SSIDs. — Enabled
enforce-dhcp
Enforces dynamic VLAN
assignment for clients from the
DHCP server.
— Disabled
essid <essid>
Defines a name that uniquely
identifies a wireless network.
— —
external-server
Configures an external RADIUS
server for authentication.
— —
g-min-tx-rate <rate>
Configures the specify the
minimum transmission rate for the
2.4 GHz band.
1-54 Mbps 1 Mbps
g-max-tx-rate <rate>
Configures the specify the
maximum transmission rate for the
2.4 GHz band.
1-54 Mbps 54 Mbps
hide-ssid
Hides the SSID. When enabled,
the SSID will not be visible for the
users.
— Disabled
hotspot-profile <name>
Associates a hotspot profile with
the WLAN SSID profile.
— —