Reference Guide

Command/Parameter Description Range Default
preshared key.
l wpa-tkip — WPA with TKIP
encryption and dynamic keys
using 802.1x.
l wpa-psk-tkip — WPA with TKIP
encryption using a pre-shared
key.
l wpa-tkip, wpa2-aes — WPA with
TKIP and WPA2 with AES
encryption.
l wpa-psk-tkip,wpa2-psk-aes -
WPS with TKIP and WPA2 with
AES encryption using a pre-
shared key.
l static-wep — WEP with static
keys.
l dynamic-wep — WEP with
dynamic keys.
per-user-bandwidth-limit
<limit>
Configures a bandwidth limit in
Kbps for the SSID users.
NOTE: The bandwidth contracts
can also be applied per SSID user.
1—65535
Kbps
—
radius-accounting
Enables accounting for the
RADIUS server authentication.
When enabled, the W-IAPs post
accounting information to the
Radius server at the specified
accounting interval.
— Disabled
radius-accounting-mode
{user-association|user-
authentication}
Configures an accounting mode
for the captive portal users.
You can configure any of the
following modes for accounting:
l user-authentication — when
configured, the accounting
starts only after client
authentication is successful
and stops when the client logs
out of the network.
l user-association — When
configured, the accounting
starts when the client
associates to the network
successfully and stops when
the client is disconnected.
— user-
authenticatio
n
radius-interim-accounting-
interval
<minutes>
Configures an interval for posting
accounting information as RADIUS
INTERIM accounting records to the
RADIUS server.
When configured, the W-IAP sends
interim-update messages with
current user statistics to the
Any integer
value in
minutes
—
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide wlan ssid-profile | 555