Reference Guide

556 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
RADIUS server at regular intervals.
radius-reauth-interval
<minutes>
Configures an interval at which W-
IAPs can periodically
reauthenticate all associated and
authenticated clients.
Any integer
value in
minutes
—
rf-band <band>
Configures the radio frequency
band on which this SSID will be
broadcast. You can select either
2.4GHz, 5 GHz, or all to specify
both bands.
2.4 GHz, 5
GHz, all
all
server-load-balancing
Enables load balancing across two
RADIUS servers if two
authentication servers are
configured for the SSID.
— Enabled
set-role{{contains|ends-with|
equals|matches-regular-
expression|
not-equals|starts-with}
<operand> <role>|value-of}
Assigns a user role to the clients.
The first rule that matches the
configured condition is applied.
You can set any of the following
conditions:
l contains — The rule is applied
only if the attribute value
contains the specified string.
l ends-with — The rule is applied
only if the attribute value ends
with the specified string.
l equals — The rule is applied
only if the attribute value is
equal to the specified string.
l not-equals — The rule is
applied only if the attribute
value is not equal to the
specified string.
l starts-with — The rule is applied
only if the attribute value
begins with the specified string.
l value-of - This rule sets the
user role to the value of the
attribute returned. To set a user
role, the value of the attribute
must already be configured on
the W-IAP.
l matches-regular-expression —
The rule is applied only if the
attribute value matches the
regular expression pattern
specified in Operand . This
operator is available only if the
mac-address-and-dhcp-
options attribute is selected in
the Attribute drop-down.
— —
set-role-by-ssid
Configures a user role based on
the type of SSID configured.
— —