Reference Guide

56 | configure terminal Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
configure terminal
configure terminal
Description
This command allows you to enter configuration commands.
Syntax
No parameters.
Usage Guidelines
Upon entering this command, the enable mode prompt changes to:
(Instant AP)(config)#
To return to EXEC mode, enter Ctrl-Z, end or exit.
Example
The following command allows you to enter configuration commands:
(Instant AP) # configure terminal
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode.