Reference Guide

wlan sta-profile
wlan sta-profile
essid <ESSID>
cipher-suite <cipher-suite-string>
wpa-passphrase <WPA-key>
uplink-band <band>
no…
Description
This command enables Wi-Fi uplink on a W-IAP.
Syntax
Command/Parameter Description Range Default
wlan sta-profile
Configures a Wi-Fi uplink profile for
a W-IAP.
— —
essid<ESSID>
Defines a unique name for the
network on which the Wi-Fi uplink
will be enabled.
— —
cipher-suite {clear| wpa-tkip-
psk| wpa2-ccmp-psk}
Configures encryption settings.
You can specify the following types
of encryption:
l clear —To clear a cipher suite
l wpa-tkip-psk —To use WPA with
TKIP encryption along with Pre-
shared key (PSK).
l wpa2-ccmp-psk — To use WPA2
with Counter Cipher Mode with
Block Chaining Message
Authentication Code Protocol
(CCMP), an AES-based
encryption mode with strong
security.
— —
wpa-passphrase <WPA-key>
Defines a WPA passphrase with
which a pre-shared key (PSK) can
be generated.
The passphrase must be between
8 and 64 characters.
— —
uplink-band <band>
Configures the band for uplink
connection. The valid options are
dot11a and dot11g.
— —
no…
Removes the configuration — —
Usage Guidelines
Use this command to configure Wi-Fi uplink for a client station connected to a W-IAP.
Example
The following commands configure the Wi-Fi uplink profile:
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide wlan sta-profile | 561