Reference Guide

console
console
enable
disable
Description
This command enables console access to a W-IAP through the serial port.
Syntax
Command/Parameter Description
console
Allows you to enter the console configuration mode.
enable
Enables console access to the W-IAP.
disable
Disables console access to the W-IAP.
Usage Guidelines
Use this command to enable or disable access to the W-IAP console and thus allow users to configure W-IAP
settings or debug system errors. By default, the console access to the W-IAP is enabled.
Example
The following example disables console access to the W-IAP:
(Instant AP)(config)# console
(Instant AP)(console)# disable
(Instant AP)(console)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.4.0.2-
4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Console configuration sub mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide console | 57