Reference Guide

zonename
zonename <name>
no…
Description
This command configures a zone name for the W-IAP. You can configure zone settings on a W-IAP and the SSID
profile, to assign an SSID to a specific W-IAP.
Syntax
Parameter Description
zonename <name>
Configures zone on a W-IAP.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure an AP zone. To assign an SSID to a specific W-IAP, the AP zone name must be
configured on the WLAN SSID profile.
The following constraints apply to the AP zone configuration:
l A W-IAP can belong to only one zone and only one zone can be configured on an SSID.
l If an SSID belongs to a zone, all W-IAPs in this zone can broadcast this SSID. If no W-IAP belongs to the zone
configured on the SSID, the SSID is not broadcast.
l If an SSID does not belong to any zone, all W-IAPs can broadcast this SSID.
Example
The following example configures a zone name on a W-IAP:
(Instant AP)# zonename zoneA
Command History
Version Description
Dell Networking W-Series Instant 6.4.0.2-
4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide zonename | 571